Oh Blush Gel and Powder - Finish 15mL

The large Oh Blush family is expanding with the GEL range!

Oh Blush gel products allow for quick and easy application!
They are catalyzed in a UV or LED lamp.
They do not require any spray hardener, reducing the risk of allergies and intolerance to spray hardeners or acrylate-based products!
They can be used with all powders .

Preparation

1. Brush nails with soap and water;
2. Push back cuticles and file nails;
3. Choose and adjust prostheses (if applicable);
4. Run a yellow block over the nail and remove the dust;
5. Apply 2 coats of Oh Blush DIP PREP to the nail plate;
6. Glue the prosthetics with the Oh Blush DIP BASE & FINISH (if applicable).

Application steps

1. Apply a very thin layer of Oh Blush DIP GEL;
2. Sprinkle the powder of your choice on the nail, shake to remove the excess, then clear the grooves with an orange stick;
3. Using a patting motion, apply a thin layer of Oh Blush DIP GEL (make sure to wipe your brush thoroughly);
4. Bake for 1 minute in a 36W UV or 18W LED lamp;
5. Repeat steps 1-4 to achieve desired strength and opacity;
6. Remove the stickiness with 99% alcohol;
7. File nails to a smooth surface, then remove dust;
8. Finish with a coat of Oh Blush GEL FINISH, cure for 2 minutes in a 36W UV lamp or 30 seconds in an 18W LED lamp.

Withdrawal

File the nail surface, then soak your nails in Oh Blush Treatment Nail Polish Remover for 5 minutes. Repeat until all traces of